Table of Contents
Advertisement
Audio Output Level radio buttons — Click either the Consumer Level (-10 dBV) or
Professional Level (+4 dBu) radio button to select the output audio level.
NOTE:
Figure 18.
Firmware upgrade
Firmware can be upgraded for each unit via the PowerCage Configuration port using the
Extron Firmware Loader utility from the Windows-based control program.
NOTES: • Firmware can be upgraded through the PowerCage Configuration port only.
Downloading the firmware from the Web site
To obtain the latest version of firmware for your PowerCage FOX 4G unit:
1.
Visit the Extron web site, www.extron.com, click the Download tab, and then click
the Firmware link on the left sidebar menu (figure 19).
Figure 19.
When you make an audio output level change, the setting is changed in the
receiver. It reports the changes to the transmitter via the optional receiver-Tx-to-
transmitter-Rx cable.
If the PC is connected to the transmitter and either the receiver-Tx-to-
transmitter-Rx cable is not connected in your system or the receiver is in the daisy
chain mode, the program cannot report the output audio level in the Audio
Adjustment area. You can change the level, but the program cannot report the
changes. The program shows the Set Consumer (or Set Professional)
level message to indicate that the output level command is control only, not an
indication (figure 18). The message is displayed for approximately 1 second.
Alternate Audio Adjustment Area Indication
• When firmware upgrades are available, they are unique to the unit:
о
A unique transmitter firmware upgrade for the Tx unit
о
A unique receiver firmware upgrade for the Rx unit.
• Your PC must be connected directly to the unit for the firmware to be updated.
1
Location of Firmware Upgrade Files
PowerCage FOX 4G DVI and PowerCage FOX 4G VGA • Remote Control
1
29
Advertisement
Table of Contents
