Table of Contents
Advertisement
Crestron C2N-SDC-DC
"Device Settings" Window
NOTE: SIMPL Windows automatically changes the Net ID value of a
device added to a program if a device with the same Net ID already exists
in the program. Always ensure that the hardware and software settings of
the Net ID match. For Net ID hardware setting details, refer to "Identity
Code" on page 8.
C2N-SDC-DC Symbol in Programming Manager
Programming Manager is where programmers "program" a Crestron
control system by assigning signals to symbols. The symbol can be
viewed by double clicking on the icon or dragging it into Detail View. A
description for each signal in the symbol is described in the SIMPL
Windows help file (F1).
Example Program
An example program for the C2N-SDC-DC is available from the
"Example Programs" section of the Crestron website
(http://www.crestron.com/exampleprograms).
Search for C2N-SDC-DC.zip.
Operations & Installation Guide - DOC. 6373
Shade & Drape DC Motor Controller
Shade & Drape DC Motor Controller: C2N-SDC-DC 17
Advertisement
Table of Contents
Need help?
Do you have a question about the C2N-SDC-DC and is the answer not in the manual?
Questions and answers