Earliest Version Software Requirements For The Pc; Programming With Simpl Windows - Crestron C2N-SDC-DC Operations & Installation Manual

Shade & Drape DC Motor Controller
Earliest Version Software Requirements for the
PC
NOTE: Crestron recommends that you use the latest software and that
each device contains the latest firmware to take advantage of the most
recently released features. Please check the Crestron website
(http://www.crestron.com/updates) for the latest versions of software and
firmware. New users are required to register to obtain access to this site.
The following are the earliest useable software version requirements for
the PC:

Programming with SIMPL Windows

NOTE: The following assumes that the reader has knowledge of SIMPL
Windows. If not, refer to the extensive help information provided with
the software.
NOTE: The following are file extensions for programs that include a
C2N-SDC-DC, developed for specific control system types:
.smw source file
.spz compiled file for 2-Series
.bin compiled file for CNX generation
.csz compiled file for CNX generation with SIMPL+
.ush compiled file for CNX generation with SIMPL+ header file
.usp source code module for SIMPL+
.umc user macro for SIMPL
NOTE: In the following description, the PRO2 control system is used.
14 Shade & Drape DC Motor Controller: C2N-SDC-DC
• SIMPL Windows version 2.05.22 with Library Update 337.
Requires SIMPL+ Cross Compiler version 1.1.
• Crestron Database version 17.1.0 or later. Required by SIMPL
Windows.
• (Optional) Crestron D3 Pro™ (version 1.43 or later)
• (Optional) Crestron Toolbox (version 1.0.5.0 or later)
• (Optional) Crestron SystemBuilder™ (version 1.02 or later)
• (Optional) Crestron iLux™ Designer (version 1.0 or later)
Crestron C2N-SDC-DC
Operations & Installation Guide - DOC. 6373