Table of Contents
Advertisement
Crestron C2N-SDC-DC
Programming Software
NOTE: Have a question or comment about Crestron software?
Answers to frequently asked questions (FAQs) can be viewed in the
Online Help section of the Crestron website. To post a question or view
questions you have submitted to Crestron's True Blue Support, log in at
http://support.crestron.com. First-time users will need to establish a user
account.
The C2N-SDC-DC can be programmed with SystemBuilder™,
D3 Pro™, iLux™ Designer, or with SIMPL Windows for the more
advanced Cresnet programmers.
SystemBuilder offers a host of tools, templates, wizards and automated
operations for creating complete control system projects. SystemBuilder
presents a simple graphical interface, organized into five views. Each
view provides a toolbox of equipment such as interfaces, third-party
sources, and control modules.
Crestron D3 Pro software creates a complete project, with no special
programming required. D3 Pro completes all necessary programming for
a base system including the control system program. Once D3 Pro creates
the project, the system interfaces and program logic can be customized. It
can also be modified with Crestron development tools (i.e., SIMPL
Windows) software, although this should rarely be necessary.
The program output of D3 Pro and SystemBuilder are SIMPL Windows
programs with much of the functionality encapsulated in macros.
Therefore, extending the capabilities of the system is very easy. Crestron
D3 Pro, SystemBuilder and SIMPL Windows are intended for users with
different levels of programming knowledge. The flexibility of each is
proportional to the degree of programming expertise (i.e., the more
flexible, the more a programmer needs to know and account for). Of
course, one can begin programming using the easiest method (Crestron
D3 Pro and SystemBuilder) and use advanced techniques that are
available from SIMPL Windows to customize the job.
Crestron iLux Designer is a Cresnet sub-system used for lighting and
shade/drape control. It is capable of storing and recalling 16 scenes and
allows individual lighting and shade control.
The iLux Designer and SystemBuilder software can be downloaded from
the Crestron website, and contain extensive help files.
Operations & Installation Guide - DOC. 6373
Shade & Drape DC Motor Controller
Shade & Drape DC Motor Controller: C2N-SDC-DC 13
Advertisement
Table of Contents
Need help?
Do you have a question about the C2N-SDC-DC and is the answer not in the manual?
Questions and answers