Optional Indications; Mechanical Position Indication (Self-Adjusting); Mechanical Position Indication Via Indicator Mark (Not Self-Adjusting) - AUMA SAEx 07.2 Manual

Indications
8.4.

Optional indications

8.4.1.

Mechanical position indication (self-adjusting)

Characteristics
8.4.2.

Mechanical position indication via indicator mark (not self-adjusting)

Characteristics
60
SAEx 07.2 SAEx 16.2/SAREx 07.2
Figure 73: Mechanical position indicator
[1] End position OPEN reached
[2] End position CLOSED reached
Independent of power supply
Used as running indication: Indicator disc (with arrow
ator operation and continuously indicates the valve position
(For "clockwise closing version", the arrow rotates in clockwise direction for
operation in direction CLOSE)
Indicates that end positions (OPEN/CLOSED) have been reached
Arrow points to symbol
Self-adjusting during commissioning (cover must not be opened)
Figure 74: Mechanical position indicator
[1] End position OPEN reached
[2] End position CLOSED reached
[3] Indicator mark at cover
Independent of power supply
Used as running indication: Indicator disc rotates during actuator operation and
continuously indicates the valve position
(For "clockwise closing " version, the symbols
direction for operations in direction CLOSE)
Indicates that end positions (OPEN/CLOSED) have been reached
(Symbols (OPEN)/
SAREx 16.2 Control unit: electronic (MWG)
ACExC 01.2 Non-Intrusive HART
(OPEN) or (CLOSED)
/
(CLOSED) point to the indicator mark
) rotates during actu-
rotate in counterclockwise
at cover)