Kt/Km Electrical Connection - AUMA SAEx 07.2 Manual

SAEx 07.2 SAEx 16.2/SAREx 07.2
ACExC 01.2 Non-Intrusive HART
6.3.

KT/KM electrical connection

Short description
SAREx 16.2 Control unit: electronic (MWG)
Table 17: Versions of the AUMA plug/socket connector
Electrical con- Figure
nection
KT
KP
KES
Figure 23: KT/KM electrical connection
[1] Terminal carrier with screw-type/spring clamp terminals
[2] Connection frame
Figure shows KT version
KT plug-in electrical connection with screw-type terminals for power connection and
spring clamp terminals for control contacts.
Properties
Plug-in integral terminal connection
with enlarged terminal compartment
Plug/socket connector with terminal
board
Plug-in terminal connection with en-
larged terminal compartment
Electrical connection
For description
and assembly
refer to chapter
➭ page 29,
KT/KM electrical
connection
➭ page 35,
KP/KPH electrical
connection
➭
page 39, KES
electrical connec-
tion
29