Getting Started; What's In The Box; Getting It Out Of The Box; Powering Up - Blizzard Lighting infinipix cyclone Getting Started

1. GETTING STARTED

What's In The Box?

• InfiniPix™ Cyclone Fixture
• Power Cable
• This Lovely User Manual

Getting It Out Of the Box

Congratulations on purchasing the InfiniPix™ Cyclone. Now that you've got your
fixture, you should carefully unpack the box and check the contents to ensure
that all parts are present and in good condition. If anything looks as if it has
been damaged in transit, notify the shipper immediately and keep the packing
material for inspection. Again, please save the carton and all packing materials.
If a fixture must be returned to the factory, it is important that the fixture be
returned in the original factory box and packing.

Powering Up!

All fixtures must be powered directly off a switched circuit and cannot be run
off a rheostat (variable resistor) or dimmer circuit, even if the rheostat
or dimmer channel is used solely for a 0% to 100% switch.
Warning! All fixtures must be connected to circuits with a suitable
Ground (Earthing).

Getting A Hold Of Us

If something happens to go wrong, visit blizzardpro.com/support and
open a support ticket. We'll be happy to help, honest.
Disclaimer: The information contained in this document are subject to change without
notice. Blizzard Lighting™ assumes no responsibility or liability for any errors or omissions
that may appear in this user manual. We reserve the right to update the existing, or create
a new document to correct any errors or omissions at any time. You can download the
latest version of this document from www.blizzardpro.com.
Author:
J. Thomas
InfiniPix™ Cyclone Manual Rev. A
Date:
2/23/2022
Page 3
Last Edited:
J. Thomas
Date:
9/13/2022
© 2022 Blizzard Lighting, LLC