Daily Repair And Maintenance; Printer Daily Maintenance Guide; Clean And Replace The Nozzle - WEEDO F150S User Manual

6.Daily Repair and Maintenance

3D Printer needs to perform the regular maintenance,as well as some daily maintenance,in order to
ensure the printer can maintain the high performance to run stably.

6.1. Printer Daily Maintenance Guide

The daily maintenance mainly contains:clean printer nozzle,replace the printer platform sticker and
tape ,printer platform regular check and leveling,replace air filtration core,optical shaft and screw
rod maintenance and others.

6.1.1.Clean and replace the nozzle

In the process of 3D printing,the part of consumable debris and dust particles is likely to accumulate
around the printing nozzle. AS time goes on,these accumulative materials can lead to that printing
precision becomes poor or nozzle is block and others.Therefor,before printing for each time ,it
needs to observe whether the nozzle is blocked and perform the cleaning.
Maintenance method: The printing nozzle is usually cleaned by tweezers ,and the impurities around
nozzle are wiped out by the cleaning cloth.
How to do If the nozzle is blocked：
Firstly, use a 2.5mm wrench to loose the screw in below photo, then unplug the nozzle.
32