Details Of The Printing Operation; Operation Panel Setting; Introduction Of The Operation Panel - WEEDO F150S User Manual

5. Details of the Printing Operation

5.1 Operation Panel Setting

There are TF card slots beside the 3D printer's display screen, which can be directly printed on the
TF card. The LCD and the control keys can be used to replace and debug the machine's filament.

5.1.1 Introduction of the Operation Panel

The control panel of the 3D printer consists of a LCD display and a knob. When it is not connected to
the computer, users can use the control panel to print data files on SD card, display printer
information, do parameter settings and so on.
Turn the button to the right and twist the next menu. The middle button is for confirmation.
1: In the menu operation, the cursor will scroll up ; in the setting operation, choose the previous
parameter.
2: In the menu operation, the cursor will scroll down; in the setting operation, choose the next
parameter.
3: In the menu operation, return to the previous menu; in the jog mode, switch the operating shaft.
4: In the jog mode, switch the operating shaft.
5: In the menu operation, enter the next menu; in the setting operation, enter or exit from the
parameter settings; in the jog mode, exit from the jog mode.
24