Application Notices; Safety Precautions; Printing Consumables; Environment Requirements - WEEDO F150S User Manual

9. Frequently Asked Questions and Troubleshooting (FAQ)......................................................................................355

1. Application Notices

1.1. About the User Guide
This User Guide contains important information on the installation, use, maintenance and other questions
frequently raised up about the 3D printer. Please read this user guide carefully before using this 3D printer. For
damages to the 3D printer and other losses caused by the violation of safety precautions and operational
processes given in this User Guide, the user should take all the responsibilities.

1.2. Safety Precautions

1) The temperature of the nozzle would be up to 200 ℃ during printing and after printing; therefore, it is
prohibited to directly touch the printing nozzle during these time.
2) The temperature of the printing platform would be up to 100 ℃ during the printing of ABS consumables or
after printing; therefore, it is prohibited to directly touch the printing platform during these time.
3) The 3D printer is equipped with active air filtration system which can handle most of the irritant gases exuding
from the heated filaments during printing. For continuous printing of a long time, it is better to place the printer in
a well-ventilated environment.
4) The structure of this 3D printer is very complex; please refer to this user guide for troubleshooting. If the
problem still cannot be solved, please contact our after-sale service. Our company will not offer warranty for
printers with unauthorized repair by the user.
5) There is high voltage within the 3D printer and it is prohibited for non-professionals to disassemble the printer.
All the consequences for violation of this precaution should be the responsibility of the user.
6) Please use the power cord and the USB data cable supplied by our company. For printer failure and other
consequences because of using the third-party power cable or USB data cable, the user should take all the
responsibilities.
7) When the 3D printer is connected to the power, please plug the power cord into three-hole flat socket
complying with the international standard. The power cord cannot be forced into a two-hole socket. The ground
wire must be connected to the ground and shall not be suspended. Our company will not be responsible for
mechanical failure or other accidents caused by the disconnection of the ground wire.
8) The input voltage of the 3D printer is 100-220V. Please feel free to use it in or outside the mainland China.
9) If unexpected power outages are frequent in your area, please equip the 3D printer with UPS power.

1.3. Printing Consumables

Please use the printing consumables provided by our company for this printer. Printing consumables sold at the
retail market are different in specifications and varying in quality; As a result, it is easy to block the printer extruder,
damage the extruder and motor. Our company will not offer warranty for printer failure for using third-party
printer consumables.

1.4. Environment requirements

This 3D printer uses a fully enclosed structure, which means that it has strong adaptability to the ambient
temperature. It can work properly in an environment from 5 ℃ to 40 ℃. If the ambient temperature is beyond
this range, the quality of the printing products will decline.
If the filaments will not be used for a long time, please store them in a sealed package, and it is especially true for
PLA consumables which will absorb moisture in prolonged exposure to air and affect the quality of finished
printing products.
3