WEEDO F150S User Manual page 20

The joint position of the printing model is set at random, and the printing model effect is as follows:
The setting of the printing model is the sharp corner position. The printing model effect is as
follows:
Joint position X coordinates: determine the X axis coordinates of the specified joint position.
Joint position Y coordinates: determine the Y axis coordinates of the specified joint position.
The seam concealment: the seam will be hidden, and there will be no concave lines or dots on the
surface of the printing model.
The relative position of the seams is determined by determining whether the joint position is
relatively set or not.
3.2.13、"Other" interface:
20