Appendix B: UL Ordinary Locations (Ord.Loc.)
B
UL Ordinary Locations (Ord.Loc.)
CANbridge NT devices are certified for use in ordinary locations in compliance with the following
standard:
•
UL 62368-1 & CAN/CSA C22.2 No. 62368-1-14, Audio/video, information and
communication technology equipment Part 1: Safety requirements
The certification number of the certified devices according to OrdLoc certification is:
•
E466303
According to the standards listed above, the devices are certified with the following marking:
Intended Use
The components are used to connect computer systems to CAN and CAN FD networks and to
connect the networks with each other. They are intended for installation on standard DIN rail.
Utilisation prévue
Les composants sont utilisés pour connecter les systèmes informatiques aux réseaux CAN et CAN
FD et pour connecter les réseaux entre eux. Ils sont destinés à être installés sur un rail DIN
standard.
CANbridge NT User Manual
Risk of interference to radio and television if used in office or home environment!
Use exclusively included accessories. Use exclusively shielded cables.
Make sure that the shield of the interface is connected with the device plug and the plug
on the other side.
Protect product from moisture and humidity.
Protect product from too high or too low temperature, and from fire.
Risque d'interférence avec la radio et la télévision si elles sont utilisées au bureau ou à la
maison !
Utilisez exclusivement les accessoires inclus. Utilisez exclusivement des câbles blindés.
Vérifiez que le blindage de l'interface est connecté avec la prise de l'appareil et la prise
de l'autre côté.
Protégez le produit de l'humidité.
Le produit ne doit pas être soumis à des températures extrêmes et doit être protégé
contre tout risque d'incendie.
25 (26)
4.01.0331.20000 1.8 en-US
Need help?
Do you have a question about the Ixxat CANbridge NT 200 and is the answer not in the manual?