HMS Networks Ixxat CANbridge NT 200 User Manual page 14

Installation
► Open menu Target and select Read configuration from target.
► Save the configuration on the computer.
► Open menu Target and select Update Firmware.
► Select the update file.
→ Firmware of the connected device is updated.
In the status window check if the update is completed successfully.
►
► If the device was updated from V5 to V6 , select V6 in drop-down list Select device version.
► If using a V5 configuration, open menu File and select Convert V5 to V6 to convert the
configuration to the latest version.
► Write the saved configuration to the device.
HMS recommends to verify configurations that are converted from V5 to V6, to make sure that all
settings are working correctly.
CANbridge NT User Manual
12 (26)
4.01.0331.20000 1.8 en-US