Moxa Technologies PT-G503-PHR-PTP-HV User Manual page 20

PRP/HSR Redundancy Box
Port Events
Link-ON
Link-OFF
Tx Low Power
Rx Low Power
Tx High Power
Temperature
Four response actions are available when events are triggered.
Action
Trap
E-Mail
Syslog
Relay
Severity
Severity
Emergency
Alert
Critical
Error
Warning
Notice
Information
Debug
Email Settings
Mail Server IP/Name
Setting
IP address
Warning email is sent when...
The port is connected to another device.
The port is disconnected (e.g., the cable is pulled out, or the opposing device shuts
down).
The port's transmitted power is under the Tx Power-Threshold for that port
The port's received power is under the Rx Power-Threshold for that port
The port's transmitted power is over the Tx Power-Threshold for that port
The port's temperature surpasses the Temperature-Threshold for that port
Description
The PT-G503-PHR-PTP series will send notification to the trap server when an event is
triggered
The PT-G503-PHR-PTP series will send notification to the email server defined in the Email
Settings
The PT-G503-PHR-PTP series will record a syslog to syslog server defined in Syslog Server
Settings
The PT-G503-PHR-PTP series supports digital inputs to integrate sensors. When an event is
triggered, the device will automate alarms by relay output
Description
System is unusable
Action must be taken immediately
Critical conditions
Error conditions
Warning conditions
Normal but significant condition
Informational messages
Debug-level messages
Description
The IP Address of your email server.
3-10
Featured Functions
Factory Default
None