Moxa Technologies PT-G503-PHR-PTP-HV User Manual page 19

PRP/HSR Redundancy Box
System Events
Cold Start
Warm Start
Configuration Change
PWR1 OffOn
PWR2 OffOn
PWR1 OnOff
PWR2 OnOff
Auth. Success
Auth. Fail
Auth. Attempts Over Limit
Password Change
DI1 (OnOff)
DI1 (OffOn)
ABC-02 Status
LLDP Table Change
Port Event Settings
Port Events are related to the activity of a specific port.
Warning email is sent when...
Power is cut off and then reconnected.
The Moxa PRP/HSR RedBox is rebooted, such as when network parameters
are changed (IP address, subnet mask, etc.).
Any configuration item has been changed.
The Moxa PRP/HSR RedBox is powered down.
The Moxa PRP/HSR RedBox is powered up.
The user has logged in to the system.
An incorrect password was entered.
More than 3 Auth. Attempts were tried
User changed the account password
Digital Input 1 was triggered by an on to off transition
Digital Input 1 was triggered by an off to on transition
Occurs when an ABC-02-USB-T was connected to or disconnected from the
PRP/HSR RedBox, or when the ABC-02-USB-T automatically imported,
exported, or backed up a configuration.
The LLDP table has been changed to account for recently connected devices
3-9
Featured Functions