Trap Settings - Moxa Technologies PT-G503-PHR-PTP-HV User Manual

PRP/HSR Redundancy Box
Enable Admin Data Encryption Key (for SNMP V1, V2c, V3, and V3 only)
Setting
Enable
Disable
User Auth. Type (for SNMP V1, V2c, V3 and V3 only)
Setting
No-Auth
MD5-Auth
SHA-Auth
Enable User Data Encryption Key (for SNMP V1, V2c, V3 and V3 only)
Setting
Enable
Disable

Trap Settings

SNMP traps allow an SNMP agent to notify the NMS of a significant event. The PRP/HSR RedBox supports two
SNMP modes, Trap mode and Inform mode.
SNMP Trap Mode—Trap
In Trap mode, the SNMP agent sends an SNMPv1 trap PDU to the NMS. No acknowledgment is sent back from
the NMS so the agent has no way of knowing if the trap reached the NMS.
SNMP Trap Mode—Inform
SNMPv2 provides an inform mechanism. When an inform message is sent from the SNMP agent to the NMS, the
receiver sends a response to the sender acknowledging receipt of the event. This behavior is similar to that of
the get and set requests. If the SNMP agent does not receive a response from the NMS for a period of time, the
agent will resend the trap to the NMS agent. The maximum timeout time is 300 sec (default is 1 sec), and the
maximum number of retries is 99 times (default is 1 time). When the SNMP agent receives acknowledgement
from the NMS, it will stop resending the inform messages.
Host IP Address 1
Setting
authentication.
Description
Enables data encryption using the specified data encryption key
(between 8 and 30 characters).
Specifies that data will not be encrypted.
Description
Allows the admin account and user account to access objects
without authentication.
Authentication will be based on the HMAC-MD5 algorithms.
8-character passwords are the minimum requirement for
authentication.
Authentication will be based on the HMAC-SHA algorithms.
8-character passwords are the minimum requirement for
authentication.
Description
Enables data encryption using the specified data encryption key
(between 8 and 30 characters).
No data encryption
Description
3-24
Featured Functions
Factory Default
No
No
Factory Default
No
No
No
Factory Default
No
No
Factory Default