Air Terminal Type; Terminal Heat; Fan - Honeywell S7751A Product Data

EXCEL 10 HAND HELD TOOL
A P P L I C A T I O N T Y P E

Air Terminal Type

Terminal Heat

F a n
Override Button
Setpoint Type
Discharge Air Sensor
Optional Sensor
Air Terminal Type
The Air Terminal Type sub-menu item is view only and not configurable. Use the Up/Down Arrow keys to select the Air
Terminal Type sub-menu item and then press the Enter key to display the status of the Air Terminal Type
(nv_config.flow_cnt_mode). The following are the selections for the Air Terminal Type .
1. Pressure Ind Supply
2. Return Flow Tracking
3. Dual Duct Heat
An following example is a screen display of an Air Terminal Type .
Air Terminal Type
Pressure Ind Supply
The operator has to press the Prev Menu key to get back to the APPLICATION TYPE Main Menu.
Terminal Heat
Use the Up/Down Arrow keys to select the Terminal Heat sub-menu item, which is required for the configuration, from the
Application Type Main Menu and then press the Enter key. This displays following screen containing five sub-menu items.
T E R M I N A L H E A T
N o n e
Hot Water/Steam
Electric One Stage
Electric Two Stage
Electric Three Stage
The operator has to press the Prev Menu key to get back to the APPLICATION TYPE Main Menu.

Fan

Use the Up/Down Arrow keys to select the Fan sub-menu item from the APPLICATION TYPE Main Menu and then press the
Enter key. This displays following screen containing three sub-menu items.
F A N
N o n e
Parallel
Series
95-2566 28