Applicable Standards - ABB ACS560 Quick Installation And Start-Up Manual

106 Technical data

Applicable standards

The drive complies with the following standards. The compliance with the European Low
Voltage Directive is verified according to standard EN 61800-5-1.
EN 60204-1:2006 + AC:2010
IEC/EN 60529:1992 + A2: 2013
EN 61000-3-12:2011
EN
IEC/EN 61800-3:2004 +
HI
A1:2012
IEC/EN 61800-5-1:2007
IEC 60664-1:2007
CE marking
A CE mark is attached to the drive to verify that the drive follows the provisions of the
European Low Voltage, EMC RoHirectives.The CE marking also verifies that the drive, in
regard to its safety functions (such as Safe torque off), conforms with the Machinery Directive
as a safety component.
Safety of machinery. Electrical equipment of machines. Part 1: General re-
quirements. Provisions for compliance: The final assembler of the machine
is responsible for installing
- emergency-stop device
- supply disconnecting device.
Degrees of protection provided by enclosures (IP code)
Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic
currents produced by equipment connected to public low-voltage systems
with input current
Adjustable speed electrical power drive systems. Part 3: EMC requirements
and specific test methods
Adjustable speed electrical power drive systems. Part 5-1: Safety requirements
– electrical, thermal and energy
Insulation coordination for equipment within low-voltage systems. Part 1:
Principles, requirements and tests.