ABB ACS560 Quick Installation And Start-Up Manual page 40

40 EN - Quick installation and start-up guide
EN
HI
1 1) ABB standard (2-wire) - Default macro for general purpose.
2 2) 3-wire macro - Suitable when the drive is controlled using momentary push buttons.
3 3) ABB standard (vector) - Similar to standard macro but uses vector control.
4 4) Motor potentiometer - Enables adjusting the motor speed using the two-push buttons.
5 5) PID - Suitable for closed-loop control systems such as pressure control, flow control, etc.
6 6) PFC - Pump and fan control logic for controlling multiple pumps or fans through relay outputs of
the drive.
7 7) Panel PID - Suitable for applications where drive is always controlled by PID and the reference
comes from an analog input AI1.
8 8) SPFC - Variant of PFC and can be used to generate a smaller pressure spike when a new aux-
iliary motor is put into operation.
9 9) Pharma - Suitable for pharmaceutical applications.
10 10) Plastic extrusion - Suitable for plastic extrusion application.
11 11) Torque control - Similar to standard macro but uses torque control.
12 12 Jigar - Suitable for Jigar machine operations.
→
Displays the status of all I/O connections.
1
1
3
3
PID
5
5
SPFC
PID
7
7
9
9
Jigar
T
11 CNTRL
11
2
2
4
4
6
6
PFC
8
8
10
10
12
12