CYBEX SPARC Owner's Manual page 32

Replace the batteries if LOW BATTERY appears at start up,
Storage or long non-use periods
When not using product for more than six months, the batteries should be removed to prevent leakage.
Check battery level
The battery level can be checked through the console.
1. Press and hold the Up
2. Navigate in the Toolbox menu to DIAGNOSTICS with the Down
3. Press the GO/Enter key to enter DIAGNOSTICS.
1. The BATTERY level is displayed on the DIAGNOSTICS screen.
• Levels 20-100% - Batteries are good.
• Levels 0-10% - Batteries need to be replaced.
4. Press the GO/Enter key to go BACK to the toolbox menu.
5. Press the Down arrow to select EXIT in the setup menu.
6. Press the GO/Enter key to exit Toolbox.
Battery replacement
Replace batteries with two new, D cell, alkaline batteries. If replacement batteries are weak and have a battery level of 40% or lower,
the LOW BATTERY screen will continue to be displayed at start up.
NOTE: Do not use rechargeable batteries.
Tools required:
• Flat head screwdriver
NOTICE: Component damage.
arrow and Down arrow for 3 seconds.
arrow.
Page 30 of 36