CYBEX SPARC Owner's Manual page 33

Replace with two, D cell, alkaline batteries only. Always use two new equal batteries, of the same current rating and manufacturer.
1. Remove the battery access cover by loosening the screw using a flat head screwdriver. The screw will remain in the battery access
cover.
• The battery access cover screw will remain in the battery access cover.
• The battery access cover will remain on the console cable.
2. Remove the two batteries from the console.
3. NOTE: The batteries must be installed in the proper direction.
Install two, D cell, alkaline batteries as shown.
Item
1
2
3
4
Item
1
2
Page 31 of 36
Description
Console
Screw
Battery access cover
Console cable
Description
Console
Batteries
Qty.
1
1
1
1
Qty.
1
2