Resistance Lever; Mount And Dismount; Quick Operation Guide - CYBEX SPARC Owner's Manual

Resistance Lever

Resistance is changed using the resistance lever. Range is 1 to 10 in increments of 1. Changes to resistance are displayed on the display
screen with the LEVEL meter.
1. Pull the resistance lever backwards to decrease the resistance level.
2. Push the resistance lever forwards to increase the resistance level.

Mount and Dismount

Mount unit safely
1. Verify foot plates are completely stopped.
2. Grasp handrail and step carefully onto foot plates.
Dismount unit safely
WARNING: Moving parts and fall hazard.
• To avoid serious injury wait until foot plates come to a complete stop before getting off unit.
• The moving parts cannot be stopped immediately, the unit is not equipped with a free wheel.
1. Grasp handrails for support.
2. Stop striding.
3. Wait until foot plates come to a complete stop.
4. Continue to hold handrails while carefully stepping off unit.

Quick Operation Guide

Maximum user weight is 400 lbs. (181 kg).
The following is a quick overview of the operation of the unit.
1. Verify foot plates are completely stopped.
Item
1
2
3
Page 24 of 36
Description
Resistance lever
Forward
Backward
Qty.
1
1
1