CYBEX SPARC Owner's Manual page 18

5. Plug the console cable from shroud into the console.
6. Insert the console cable into the mounting tabs on the battery access cover.
Install Foot Pads
Have one person lift the unit while a second person places a foot pad under each of the two back feet.
Level Unit
This procedure will level the unit by evenly adjusting the weight on the rear feet. Leveling the unit will eliminate rocking during use.
NOTE: References to left and right are from the users perspective during use.
1. Verify foot plates are completely stopped.
Item
1
2
3
4
Item
1
Page 16 of 36
Description
Console cable
Console
Battery access cover
Mounting tabs
Description
Foot pads
Qty.
1
1
1
1
Qty.
2