CYBEX SPARC Owner's Manual page 16

3. Lift the lower rear support legs so the front transport wheels are able to roll on floor.
Use proper lifting methods.
4. Move unit to intended location.
5. Lower rear support legs.
Install Handrail Assembly
1. Place handrail assembly into position on the base assembly.
2. Install screws and lock washers securing handrail assembly to base assembly using a 3/16" Allen wrench.
3. Remove plastic sheet from base assembly.
4. Place cup holder onto base assembly.
5. Install screws securing cup holder to base assembly using a Phillips screwdriver.
Item
1
2
3
4
5
Item
1
2
Page 14 of 36
Description
Base assembly
Handrail assembly
Screw
Lock washer
Plastic sheet
Description
Screw
Cup holder
Qty.
1
1
6
6
2
Qty.
2
1