FingerTec R2 User Manual page 17

Some precautions have to be taken to get a good read every time.
·
Make sure the center point of your finger is placed in the middle of the scanner for a good
read.
·
Recommended to use index finger. The terminal accepts other fingers but index is the
most convenient.
·
Make sure the finger is not wet, too dry, injured or dirty
·
Do not press hard on the sensor, just place it comfortably
·
Avoid direct sunlight or bright light
pAsswoRd VeRifiCATion
Password is an option for those who prefer not to use other verification methods. To verify via
password, insert User ID > OK > insert password and press OK.
CARd VeRifiCATion
Place the card on the card scanning area and the terminal will read and verify the card.
Types of Verification Methods
The fingerprint terminals offer various verification methods which include fingerprint (FP),
User ID (PIN), Password (PW), and RFID (RF). You can configure the terminal to offer multiv-
erification methods. Press Menu > Options > Access Options > Group VerType > Select the
Group > OK > Select the time > OK > Down arrow and select Verification Type > OK
The terminals support the following combinations of verification:
VERIFICATION TYPE
FP
PIN
PW
RF
FP/PW
FP/RF
PW/RF
PIN & FP
FP & PW
18
CONTENTS
Center point
DESCRIPTION
Fingerprint only
User ID only
Password only
RFID Card only
Fingerprint or password
Fingerprint or RFID Card
Password or RFID Card
User ID and fingerprint
Fingerprint and password