Viewing The User Guide In The Internet; Terminal Included Accessories - FingerTec R2 User Manual

1• GETTING STARTED

Viewing the User Guide in the Internet

The User Guide is available in the package when you purchased the terminal. The User
Guide is also available online at
Choose the language that you prefer for your User Guide.

Terminal Included Accessories

1
2 3 ESC
4
5 6
7
8 9
0
OK
MENU
A Packet of Bolts
Use the screws to hold
the back plate of the
terminal against a wall.
Door Accessories Cable
Cables for 12V door lock, push
button, 12V alarm, door sen-
sor and 12V door bell, for door
access.
USB Extension
For USB Flash disk connectivity in n-
gerprint terminal for downloading and
uploading of data.
Screwdriver
Use the screwdriver to open the back
plate of ngerprint terminal and to
install the back plate against a wall.
RFID Cards (5 pieces) /
HID/MIFARE Cards (1 piece)
For card enrollment and veri cation.
* Exclusively for R2 model only
RS232/RS485/Wiegand
Output Cable
For serial cable connection and
Wiegand Output connection.
TCP/IP Connector
Connecting the network cable
from a PC or Network switch
to a TCP/IP connector at the
terminal.
TCP/IP Cable
Connecting rprint termi-
nal for Ethernet connection.
Power Supply Cable
Connecting ngerprint termi-
nal to the 12V power supply.
CONTENTS
3