FingerTec R2 User Manual page 6

ITEM
LCD Screen
LED Display
Keypad
Fingerprint Sensor
RFID Card Induction Area
USB Port
Speaker
Reset Button
Power
There is no power button available. Restart using the reset button shown on the bottom
of the terminal.
Keypad
You can insert inputs into the terminals through the keypad. It contains numbers
from 0-9, an OK button, an ESC/Cancel button, a Scroll up/down button, a doorbell
button and a Menu button.
6
CONTENTS
FUNCTION
Displaying status of terminal, day, date and time.
Green LED – The terminal is working ne and it is in standby mode.
Red LED – There is an error at the terminal that requires checking. For
rst time use, the terminals need to be charged fully to avoid having
the red light blinking.
To input instructions into the terminal and to allow con guration.
To scan nger for con rmation of identity.
Area that reads RFID cards.
To upload/download users information, password and transaction
logs via USB ash disk.
For terminal voice emission.
To restart the terminal as and when required.
Button
1 2
4 5
7 8
0
MENU
3
ESC
6
9
OK