Receiving "Pager Code" Calls From A Remote Station (Standby Operation); Using The Pager Answer Back; Notification Of A Call From A Other Station By The Bell Function - Yaesu FT5Dr Advance Manual

Receiving "pager code" calls from a Remote Station (Standby Operation)

When the Pager function is activated, and a call is received with a corresponding Code,
the audio is heard. When the PTT switch is pressed, the "
station's audio is heard regardless of whether the code matches or not. About 10 seconds
after the signal disappears, the "
signal will not be heard.
Furthermore, when the Bell function (see below) is activated, the bell rings and the " " icon
blinks when receiving calls from the other station.

Using the Pager Answer Back

when called by another station with a corresponding pager code, the transceiver is auto-
matically placed in the transmit mode (for about 2.5 seconds) to notify the other station
that you are ready to communicate.
1. Activate the pager function by referring to "Using the Pager Function" (page 12).
2. Press the [F
MENU
If [CODE] is not displayed, touch [FWD →] to display [CODE] and then touch it.
3. Press the [F
MENU
to select "ON".
4. Press the PTT switch to transmit a call to the specific station.

Notification of a Call from a Other Station by the Bell Function

The Bell may be set to sound an Alert when a call from another station containing a cor-
responding tone, DCS or pager code is received. " " icon on the display blinks to provide
a later notice of the call from the other station.
1. Press and hold the [F
2. Press the [F
MENU
3. Rotate the DIAL knob to select "BELL".
4. Press the [BACK] key, and then rotate the DIAL knob to
select "RINGER", and then press the [F
5. Rotate the DIAL knob to select the desired number of
times (1-20 times or continuous) the Bell rings.
• • • 1time ↔ 2times ↔ • • • ↔ 20times ↔ CONTI • • •
6. Press the PTT switch to save the setting and return to normal operation, and the " "
icon appears on the display.
If the setting is "CONTI" (continuous), the bell keeps sounding until an operation is made.
" icon will light, and the sound of the unmatched
] key  [CODE].
] key, and then rotate the DIAL knob
] key  touch [SIGNALING]  [1 BELL].
MENU
] key.
] key.
MENU
14
" icon blinks and the other
6 PAGER
ANS-BACK: ON
CODE-RX : 05
CODE-TX : 05
1 BELL
SELECT : BELL
RINGER : 1time
47
47