Busy Led; Clock Type; Gps Log; Home Vfo - Yaesu FT5Dr Advance Manual

C4fm/fm 144/430mhz dual band digital transceiver
Hide thumbs Also See for FT5Dr:
Table of Contents

Advertisement

5 BUSY LED

When listening to the radio continuously or to extend the remaining battery operating
time, turn off the BUSY indicator to save battery power consumption.
1. Press and hold the [F
2. Rotate the DIAL knob to select "A BAND", "B BAND" or "RADIO", then press the
[F
] key.
MENU
3. Rotate the DIAL knob to select the desired setting.
ON
Turns the BUSY indicator ON.
OFF
Turns the BUSY indicator OFF.
Remark
The default setting: ON
4. Press the [BACK] key.
5. To change the setting for other bands, repeat steps 2 to 4.

6 CLOCK TYPE

Set the micro computer Clock Shift function may be activated to eliminate an internally
generated spurious high frequency signal. Select [A] for normal use.
1. Press and hold the [F
2. Rotate the DIAL knob to select the desired setting.
A
Automatically switches the Clock Shift function between ON & OFF.
B
Activates the Clock Shift function constantly.
Remark
The default setting: A

7 GPS LOG

Set the interval at which the current position GPS information is saved to the microSD
memory card.
1. Press and hold the [F
2. Rotate the DIAL knob to select the time interval:
OFF / 1 sec / 2 sec / 5 sec /10 sec / 30 sec / 60 sec
Remark
The default setting: OFF
3. If OFF is selected, no GPS Information is saved onto the microSD memory card
• Data saved onto the microSD memory card is saved in GPSyymmddhhmmss.LOG format.
• Saved data may be viewed by using OEM PC applications*.
* Yaesu does not provide technical support for PC applications.

8 HOME VFO

Set whether or not to permit tuning off of the home channel and transfer to the VFO.
1. Press and hold the [F
2. Rotate the DIAL knob to select the desired setting.
ENABLE
Turning the home channel DIAL knob shifts the frequency from the
home cancel to the VFO, and then changes the VFO mode.
DISABLE
Turning the Dial on the home channel does not switch to the VFO.
Remark
The default setting: ENABLE
] key  touch [CONFIG]  [5 BUSY LED]
MENU
] key  touch [CONFIG]  [6 CLOCK TYPE]
MENU
] key  touch [CONFIG]  [7 GPS LOG]
MENU
] key  touch [CONFIG]  [8 HOME VFO]
MENU
59

Advertisement

Table of Contents
loading

This manual is also suitable for:

FtsdeFt5de

Table of Contents