Dual Receive (D.rcv) Function; Registering The Priority Channel - Yaesu FT5Dr Advance Manual

Dual Receive (D.RCV) Function

The transceiver is equipped with the following 3 types of Dual Receive Functions:
• VFO Dual Receive
• Memory Channel Dual Receive
• Home Channel Dual Receive
The transceiver checks for signals on the frequency registered to the selected memory
channel (Priority Memory Channel) once approximately every 5 seconds. When receiving
a signal on the frequency registered to a priority memory channel, the Dual Receive func-
tion automatically pauses, and allows reception of the signals.
Example: Checking the priority memory channel "6" (432.500 MHz), while receiving
"145.240 MHz".
VFO

Registering the priority channel

1. Register the preferred receive frequency and communication mode to the priority
memory channel (see the operating manual).
2. Press the [V/M • ] key to recall the memory channel.
3. Touch and hold the [F
DIAL knob to select the memory channel registered in
step 1.
4. Touch [PRI.CH].
• The priority memory channel setting is saved and
operation returns to the prior recalled memory
channel.
• When recalling the priority memory channel, the " "
icon appears on the upper right side of the memory
channel number.
The transceiver monitors signals
on the frequency registered to the
Priority Memory Channel, once
approximately every 5 seconds.
The transceiver returns to
the previous frequency
quickly and continues to
receive mode when there
is no signal.
] key, and then rotate the
MENU
24
Priority
Memory Channel
When the transceiver receives
a signal on the frequency registered
to the priority memory channel, dual
reception stops and signal receiver
switches to priority memory channel.