Yaesu FT5Dr Advance Manual page 41

Setup Menu no. / Item
5 SCAN WIDTH
6 PRIORITY REVERT
GM
* For details of the functions, refer to the GM Function Instruction Manual.
1 DP-ID LIST
2 RADIO ID CHECK
WIRES-X
* For details of the functions, refer to the WIRES-X Instruction Manual.
1 RPT/WIRES FREQ
2 SEARCH SETUP
3 EDIT CATEGORY TAG
4 REMOVE ROOM/NODE Delete registered Category ROOMs.
5 DG-ID
CONFIG
1 APO
2 BCLO
3 BEEP
4 BEEP LEVEL
5 BUSY LED
6 CLOCK TYPE
7 GPS LOG
8 HOME VFO
9 LOCK
10 MONI/T-CALL
11 TIMER
12 PASSWORD
13 PTT DELAY
14 RPT ARS
15 RPT SHIFT
16 RPT SHIFT FREQ
17 SAVE RX
18 STEP
Description
Set the scan mode operation.
Turn the "Priority Channel Revert"
feature ON or OFF during Dual
Receive.
Displays the DP-ID list screen.
Display the transceiver specific
number (ID). (Uneditable)
Set the frequency to be used for
Repeater/WIRES.
Set the WIRES ROOM selection
method.
Edit category tags.
Set the DG-ID number for WIRES-X. 01 to 99 / AUTO
Set the length of time until the
transceiver turns off automatically.
Turn on/off the busy channel lockout
function.
Set the beep emitting function, and
set whether or not to emit the beep
sound when a band edge/CH1 is
encountered.
Beep volume setting.
Turn on/off the BUSY indicator.
Set the clock shift function.
Set the GPS log recording time
interval.
Enable/disable VFO transmission in
Home Channel.
Configure the lock mode setting.
Select the function of the MONI/
T-CALL switch.
Switch the timer between ON and
OFF.
Input the password.
Set the PTT delay time.
Turn the ARS function on/off.
Set the repeater shift direction.
Set the repeater shift width.
Set the receive save time.
Set the channel step.
(Options in bold are the default settings)
VFO ： ALL / BAND
MEMORY ： ALL CH / BAND
BANK LINK: ON / OFF
ON / OFF
MANUAL / PRESET
HISTORY / ACTIVITY
C1 to C5
C1 to C5
OFF / 30 min to 12 hour 00 min
ON / OFF
SELECT ： KEY&SCAN / KEY / OFF
EDGE ： ON / OFF
LOW / HIGH
A BAND ： ON / OFF
B BAND ： ON / OFF
RADIO ： ON / OFF
A / B
OFF / 1 sec / 2 sec / 5 sec / 10 sec / 30 sec /
60 sec
ENABLE / DISABLE
KEY&DIAL / PTT / KEY&PTT / DIAL&PTT /
ALL / KEY / DIAL
MONI / T-CALL
The default setting: MONI (USA version),
T-CALL (European/Asian version)
POWER ON ： 00:00 ～ 23:59
POWER OFF ： 00:00 ～ 23:59
OFF / ON : - - - -
OFF / 20 ms / 50 ms / 100 ms / 200 ms
ON / OFF
SIMPLEX / -RPT / +RPT
0.000MHz to 150.000MHz
OFF / 0.05 sec (1:1) to 20.0 sec (1:400)
AUTO / 5.0 kHz / 6.25 kHz / (8.33 kHz) /
(9.0 kHz) / 10.0 kHz / 12.5 kHz / 15.0 kHz /
20.0 kHz / 25.0 kHz / 50.0 kHz / 100.0 kHz
41
Selectable options
–
–