When the All Reset function is performed, all data registered in the memory is deleted. Be sure to note
the settings on paper or back up the data on a microSD memory card. For details on how to save data
onto a microSD memory card, refer to "Setup Menu: SD CARD Menu Operations".
All Reset
To restore all transceiver settings and memory content to the factory defaults.
1. Turn the transceiver OFF.
2. Press and hold the [F
transceiver ON simultaneously.
The beep sounds and the confirmation screen is displayed.
3. Touch [OK].
• The beep will sound, and the transceiver will reset all factory defaults.
• After resetting all defaults, the call sign input message appears on the LCD. Set the
call sign.
• To cancel the resetting, touch [CANCEL].
Setup Menu Reset
Reset only the Setup Menu parameters, and restore them to the default settings.
1. Turn the transceiver OFF.
2. Press and hold the [F
simultaneously.
The beep sounds and the confirmation screen is displayed.
3. Touch [OK].
• The beep will sound, and the transceiver will reset all Setup Menu settings to defaults.
• To cancel the resetting, touch [CANCEL].
• To reset all the following items, perform All Reset (see above).
[DISPLAY]
8 OPENING MESSAGE
[SIGNALING]
1 BELL
2 DCS CODE
3 DCS INVERSION
5 DTMF MEMORY
6 PAGER
7 PR FREQUENCY
9 SQL S-METER
11 SQL TYPE
12 TONE SQL FREQ
[WIRES-X]
1 RPT/WIRES FREQ
2 SEARCH SETUP
3 EDIT CATEGORY TAG
[CALLSIGN]
CALLSIGN
Caution
] key, the [A/B] key and the [BAND] key and turn the
MENU
] key and the [A/B] key and turn the transceiver ON
MENU
[TX/RX]
1-1 ANTENNA ATT
1-2 FM DEVIATION
1-3 RX MODE
2-4 DIGITAL VW
[SCAN]
5 SCAN WIDTH
[CONFIG]
6 CLOCK TYPE
12 PASSWORD
15 RPT SHIFT
16 RPT SHIFT FREQ
18 STEP
[OPTION]
2 Bluetooth
3 DEVICE LIST
4 Bluetooth AUDIO
37
[MEMORY]
1 BANK LINK
2 BANK NAME
3 MEMORY NAME
5 MEMORY SKIP
[GM]
1 DP-ID LIST
[APRS]
6 APRS MSG GROUP
7 APRS MSG TEXT
13 BEACON INFO
15 BEACON STATUS TEXT
17 COM PORT SETTING
18 DIGI PATH
19 GPS SETUP
23 CALLSIGN (APRS)
24 MY POSITION
25 MY SYMBOL