Split Memory - Yaesu FT5Dr Advance Manual

Split Memory

Two different frequencies, one for receive and another for transmit, may be registered to
a memory channel.
1. Register the receive frequency to a memory channel first.
• For additional details on registering to a memory channel,
refer to the "Registering to Memory Channels" in the
Operating Manual.
2. Set the transceiver to the desired transmit frequency.
3. Press and hold the [V/M • ] key .
4. Rotate the DIAL knob to select the channel number that
the receive frequency was registered to on step1.
5. While pressing and holding the PTT switch, press the
[V/M • ] key.
• The beep sounds and the split memory is saved.
• While recalling the split memory, "
the LCD.
While operating the split memory, Press the [F
and receive frequencies temporarily. When reversing the frequencies," " will blink.
" is displayed on
] key  [REV], to reverse the transmit
MENU
20
Registering the receive
frequency.
Registering the transmit
frequency.
Recalling the split memory