Yaesu FT5Dr Advance Manual page 40

Setup Menu no. / Item
MEMORY
1 BANK LINK
2 BANK NAME
3 MEMORY NAME
4 MEMORY PROTECT
5 MEMORY SKIP
6 MEMORY WRITE
SIGNALING
1 BELL
2 DCS CODE
3 DCS INVERSION
4 DTMF MODE
5 DTMF MEMORY
6 PAGER
7 PR FREQUENCY
8 SQL LEVEL
9 SQL S-METER
10 SQL EXPANSION
11 SQL TYPE
12 TONE SQL FREQ
13 TONE SEARCH
14 WX ALERT
SCAN
1 DW TIME
2 SCAN LAMP
3 SCAN RE-START
4 SCAN RESUME
Description
Set the memory bank link.
Assign a name to each memory bank. BANK1 to BANK24
Input the memory channel tag.
Set whether to allow or prohibit
memory channel registration.
Set for skip memory / specify memory. OFF / SKIP / SELECT
Set the automatic channel number
increment when registering to a
memory channel.
Set the bell function settings.
Set the DCS code.
Select a combination of DCS inversion
codes in terms of communication
direction.
Set the transmission of DTMF code
registered to a DTMF memory
channel, DTMF code transmission
delay time, and DTMF code
transmission speed.
Set the DTMF auto dialer channel
and code (16 characters).
Turn the pager answer back Function
ON/OFF, and specify a personal code
(transmit/receive).
Set a non-communication squelch.
Select a squelch level.
Select an S-Meter squelch level.
Set a squelch type separately for
Receive and transmit.
Select a squelch type.
Set a tone frequency.
Set the audio output during tone
search. Turn the muting function on/
off and select a tone search speed.
Enables/Disables the Weather Alert
Feature.
Set the priority memory channel
monitoring interval.
Set whether or not to light up the scan
lamp when scanning stops.
Set the scanning restart time.
Configure the scan stop mode
settings.
(Options in bold are the default settings)
BANK1 to BANK24
BANK LINK ON / OFF
Up to 16 letters
ON / OFF
NEXT / LOWER
SELECT ： OFF / BELL
RINGER ： 1 time to 20 times / CONTINUOUS
DCS 023 to DCS 754
RX (Receive): NORMAL (Homeomorphic) /
INVERT (Inversion) / BOTH (Both Phase)
TX (Transmission): NORMAL
(Homeomorphic) / INVERT (Inversion)
MODE ： MANUAL / AUTO
DELAY ： 50 ms / 250 ms / 450 ms / 750 ms /
1000 ms
SPEED ： 50 ms / 100 ms
CH1 to CH10
ANS-BACK ： ON / OFF
CODE-RX ： 01 to 50 for each, 05 47
CODE-TX ： 01 to 50 for each, 05 47
300Hz to 3000Hz 1600Hz
LEVEL0 to LEVEL15 LEVEL1
LEVEL0 to LEVEL8 LEVEL1 (AM Radio)
LEVEL0 to LEVEL8 LEVEL2 (FM Radio)
OFF / LEVEL1 to LEVEL10
ON / OFF
OFF / TONE / TONE SQL / DCS /
REV TONE / PR FREQ / PAGER / （D CD） /
（TONE-DCS） / （D CD-TONE SQL）
* The options in the parentheses are
available when the SQL expansion is ON.
67.0Hz to 254.1Hz 100.0 Hz
MUTE ： ON / OFF
SPEED ： FAST / SLOW
ON / OFF
0.1 sec to 10 sec 5.0 sec
ON / OFF
0.1 sec to 10 sec 2.0 sec
SCAN ：
BUSY / HOLD / 2.0 sec to 10 sec 5.0 sec
DW ： BUSY / HOLD / 2.0 sec to 10.0 sec
40
Selectable options