Functional Test Of C-Arm Lift Movement And Parking Brakes - Siemens ARCADIS Avantic Start-Up Instructions

General Startup

Functional test of C-arm lift movement and parking brakes

Fig. 5:
•
Switch on the main system (C-arm).
•
To move the C-arm downward, press the downward button.
•
The lifting column moves to position 1
cally. A stop signal (3 beeps) sounds simultaneously.
•
To lower the lifting column further, press the downward button once again.
•
The lifting column can then be moved by a further 7cm to the lowest point, position 2
(2/Fig. 5 / p.
downward button is pressed.
•
To move the C-arm upward, press the upward button. No signal sounds in this case.
•
When both switches are pressed, the lifting motor moves in the initially selected direc-
tion.
•
Loosen the different parking brakes and apply them again. Secure blocking of the rele-
vant movement must be assured.
•
Document the function of the C-arm movements, brakes and warning signals in the test
protocol, "C-arm movement and emergency stop" .
Siemens AG
Medical Solutions
Function test
27). In this area a signal (3 beeps) sounds for safety reasons each time the
SPR2-330.815.01.03.02
12.06
(1/Fig. 5 / p. 27) and remains there automati-
Page 27 of 66
CS PS SP
27
2.3
ARCADIS Avantic