Specific System Settings
Backup
NOTE
NOTE
•
Select "Backup & Restore" in the Service Software Home Menu.
•
Place the backup CD (located in the monitor cart service compartment) in the CD-ROM
drive.
Fig. 18: Backup & Restore_Command
Siemens AG
Medical Solutions
A backup must be created following software installation, every
software update, and every system adjustment.
After a backup group has been successfully burned to CD, the fol-
lowing message is displayed: "Please insert medium in CD-RW in
order to continue."
Confirm this message with "OK".
This does not require a new CD.
SPR2-330.815.01.03.02
12.06
Page 41 of 66
CS PS SP
41
3.1
ARCADIS Avantic