Paper Printer (Optional); Codonics Printer 1660L; Sony Printer Up-D72 X; Sony Printer Up-970 And Up-990 - Siemens ARCADIS Avantic Start-Up Instructions

Final Work Steps
4-

Paper printer (optional)

4Final Work Steps
NOTE

Codonics printer 1660L

Perform the following steps according to the "User Manual" of the printer:
•
Transport instructions (see preface).
Note: Unpack the printer and remove the two transport pins. Place the printer in the
cart, connect the power cable and the 25-pin plug to the printer (cables are ready for
use in the printer slot of the cart), and set the power switch to "1".
•
Install the print
NOTE

Sony printer UP-D72 X

Perform the following steps according to the user manual for the printer (CD-ROM):
•
Unpack the printer.
•
Fill the paper tray with paper (follow instructions on paper package).
•
Plug in the USB cable.
•
Print a test page after the automatic test.
•
Follow the instructions on the CD-ROM from the manufacturer in the event of problems.

Sony Printer UP-970 and UP-990

Perform the following steps according to the user manual for the printer (CD-ROM):
•
Unpack the printer.
•
Fill the paper tray with paper (follow instructions on paper package).
•
Plug in the USB cable.
•
Print a test page after the automatic test.
•
Follow the instructions on the CD-ROM from the manufacturer in the event of problems.
Siemens AG
Medical Solutions
If a paper printer was ordered with the system, all mechanical
work and programming was performed at the factory.
In the case of paper printers delivered after the system, they have
to be installed and started up in accordance with the Installation
and Setting instructions SPR2-310.814.03...
media>(SPR2-310.815.01 / General Start-up)
Keep the transport safety materials. They are required when
replacing or shipping the printer.
SPR2-330.815.01.03.02
12.06
Page 45 of 66
CS PS SP
45
0
0
0
0
ARCADIS Avantic