Dip-Switch Settings Of The Can-Box Rlc-Fo01-A Modules - Caraudio-Systems r.LiNK RL-FD79-TF Manual

1.3.

Dip-switch settings of the Can-Box RLC-FO01-A modules

Setting the Dip-switches of the Can-Box RLC-FO01-A connected on the 500KB 8Pin Molex
plug
Vehicle/ navigation
Video-in-motion permanent
Video-in-motion selective*
* With dip1 to OFF the included green cables are used to activate the video-in-motion
function.
Note: Dip switch functions of the RLC-FO01-A
Dip 1 – activation TV-free
Dip 2 – no function
Dip 3 – no function
Dip 4 – no function
Dip 5 – CAN-bus termination resistor on the vehicle side
Dip 6 – CAN-bus termination resistor on the head-unit side
Setting the Dip-switches of the Can-Box RLC-FO01-A connected on the 125KB 8Pin Molex
plug
Vehicle/ navigation
Video-in-motion permanent
Video-in-motion selective*
* With dip1 to OFF the included green cables are used to activate the video-in-motion
function.
Note: Dip switch functions of the RLC-FO01-A
Dip 1 – activation TV-free
Dip 2 – Rear-view camera activation
Dip 3 – no function
Dip 4 – no function
Dip 5 – CAN-bus termination resistor on the vehicle side
Dip 6 – CAN-bus termination resistor on the head-unit side
Version 01.03.2019
Dip 1 Dip 2 Dip 3 Dip 4 Dip 5 Dip 6
ON OFF OFF
OFF OFF OFF
Dip 1 Dip 2 Dip 3 Dip 4 Dip 5 Dip 6
ON ON OFF
OFF OFF OFF
OFF OFF ON
OFF OFF OFF
OFF OFF ON
OFF OFF OFF
RL-FD79-TF