3B G3 Series User Manual page 48

Luna G3 BPAP 25A (G3 B25A) User Manual
Recommended separation distances between portable and mobile RF
communications equipment and the device
The device is intended for use in an electromagnetic environment in which
radiated RF disturbances are controlled. The customer or the user of the device
can help prevent electromagnetic interference by maintaining a minimum
distance between portable and mobile RF communications equipment
(transmitters) and the device as recommended below, according to the
maximum output power of the communications equipment.
Rated
150 kHz ～ 80 MHz
maximum
output of
transmitter
W
0.01
0.1
1
10
100
Note 1: At 80 MHz and 800 MHz, the higher frequency range applied.
Note 2: These guidelines may not apply in all situations. Electromagnetic
propagation is affected by absorption and reflection from structures, objects and
people.
For transmitters rated at a maximum output power not listed above, the
recommended separation distance d in meters (m) can be estimated using the
equation applicable to the frequency of the transmitter, where P is the maximum
output power rating of the transmitter in watts (W) according to the transmitter
manufacturer.
80 MHz ～ 800 MHz
=
d . 1 17 p
0.12
0.37
1.17
3.70
11.7
45 / 48
800 MHz ～ 2.5 GHz
=
d . 0 35 p
0.04
0.12
0.35
1.11
3.50
MID-97/v1.0
=
d . 0 70 p
0.07
0.23
0.70
2.22
7.00