Luna G3 BPAP 25A (G3 B25A) User Manual
12.5 Assembling the Tubing / Heated Tubing and Mask
(1) Connect one end of the tubing to the air outlet of the device, as shown in Fig.
12-7.
(2) Connect the heated tubing joint to the air outlet of the device, and then insert
the power plug into the heated tubing port on the back of the device, as shown in
Fig. 12-8.
Heated Tubing Joint
Heated Tubing
If the heated tubing is connected correctly, the line next to the icon
become a number in the Main Interface on the screen of the device, as shown in
Fig. 12-9.
Air Outlet
Tubing
Fig. 12-7
Air Outlet
Fig. 12-8
Fig. 12-9
17 / 48
Heated Tubing
Power Plug
MID-97/v1.0
will