Connecting To Power - 3B G3 Series User Manual

Luna G3 BPAP 25A (G3 B25A) User Manual
(2) Install the filter cap containing the air filter to the device, as shown in Fig. 12-2.
(3) Change the air filter and filter cap to the PM2.5 filter, as shown in Fig. 12-3.
CAUTIONS!
• The air filter or the PM2.5 filter must be in place when the device is operating.
• Device must be unplugged when installing the air filter and filter cap or PM2.5
filter.

12.3 Connecting to Power

(1) Insert the plug of the power adapter into the DC Inlet on the back of the device
(2) Connect the power cord to the power adapter
(3) Plug the other end of the power cord into the power outlet.
Note: The length of the power cord and power adapter is 1.5 m and 1.8 m
respectively without the function of preventing electromagnetic interference.
Fig. 12-2
PM2.5 Filter
Fig. 12-3
Power Adapter
Power Cord
Fig. 12-4
15 / 48
MID-97/v1.0
DC Inlet