Emptying The Water Chamber; Setting The Humidity Level - 3B G3 Series User Manual

Luna G3 BPAP 25A (G3 B25A) User Manual
WARNING!
• For safety purposes, the device must be placed on a flat surface at a level lower
than the patient's head on a bed, so that the condensation flows back to the water
chamber rather than remain in the tubing causing rainout.
CAUTIONS!
• Avoid moving or tilting the device when the water chamber has water in it.
• Take precautions to protect furniture from water damage.

14.2 Emptying the Water Chamber

(1) Removing the water chamber according to instructions in 14.1.1.
(2) Emptying the water chamber: Open the cap, as shown below, and pour any
remaining water out of the water chamber.
CAUTION!
• Empty and air-dry the water chamber when the device is not in use.
(3) Returning the Water Chamber according to instructions in 14.1.3.

14.3 Setting the Humidity Level

After the device is powered on, turn the Knob
humidifier and to adjust the humidity level according to instructions of the Patient
Menu of the device.
There are five humidity levels available, and the number of humidity level will
appear in the Main Interface on the screen of the device. The number 2 next to the
icon indicating the humidity is adjusted to Level 2, as shown in Fig. 14-8. The
temperature of the water in the water chamber maintains a constant set level.
Fig. 14-7
to turn on or turn off the heated
Fig. 14-8
24 / 48
MID-97/v1.0