Cleaning The Transfer Box - 3B G3 Series User Manual

Luna G3 BPAP 25A (G3 B25A) User Manual MID-97/v1.0
(2) Cleaning the Water Chamber: You may also clean the water chamber with a
soft cloth (dip the soft cloth in liquid soap if necessary), rinse it thoroughly, and then
wipe it dry with a soft cloth.
(3) Replacing the Water Chamber according to instructions found in 14.1.3.
WARNINGS!
• Emptying and cleaning the water chamber daily will help prevent mold and
bacteria growth.
• Allow the water in the chamber to cool down to room temperature before
removing it from the device.
CAUTIONS!
• Clean the water chamber only after the water in it cools. Make sure that no water
enters the device.
• After cleaning, rinse the water chamber throughly in clean water to make sure
that no soap residue is left; then wipe it dry with a lint-free cloth, so as to prevent
calcareous accumulations.
• Inspect the water chamber for any leak or damage. Replace the water chamber
if any damage is present.
• It is recommended to clean the water chamber and change the water daily.

18.3 Cleaning the Transfer Box

(1) Removing the Transfer Box: First remove the water chamber from the device,
and then remove the transfer box, as shown in Fig. 18-2.
Transfer Box
Fig. 18-2
(2) Cleaning the Transfer Box: Rinse the transfer box throughly in clean water. You
may also clean the transfer box with a soft cloth (dip the soft cloth in liquid soap if
necessary), rinse it thoroughly, and then wipe it dry with a soft cloth.
34 / 48