3B G3 Series User Manual page 30

Luna G3 BPAP 25A (G3 B25A) User Manual
Display Space
Note: The above interface only applicable to the device, it does not activate the
SmartC, SmartA or SmartB. If the SmartC, SmartA or SmartB is enabled, the symbol
will appear in the status bar at the top of the screen, as shown in Fig. 16-3.
The first icon on the upper part of the screen indicates the Preheat Function Icon,
the second icon
Setup Icon, the fourth icon
icon indicates the Initial Setup
among the five icons, and the interface displayed on the screen changes
accordingly.
Note: If the humidity level is off, the Preheat Icon
16-3.
Status Bar
Menu Bar
Fig. 16-1
Fig. 16-2
Fig. 16-3
indicates the Accessories ,
indicates
Icon. As you turn the Knob
27 / 48
the third icon
the Report Interface Icon, and the fifth
will Turn gray, as shown in Fig.
MID-97/v1.0
indicates Mask
, the cursor switches