3B G3 Series User Manual page 46

Luna G3 BPAP 25A (G3 B25A) User Manual
Guidance and manufacturer's declaration - electromagnetic immunity
The device is intended for use in the electromagnetic environment specified
below. The user of the device should make sure that it is used in such an
environment.
Immunity Test
Electrostatic
discharge (ESD)
IEC 61000-4-2
Electrical fast
transient / burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Voltage dips,
short
interruptions
and voltage
variations on
power supply
input lines
IEC 61000-4-11
Power
frequency (50 /
60 Hz)
magnetic field
IEC 61000-4-8
Note: U is the AC mains voltage prior to application of the test level.
T
IEC 60601 Test Compliance
Level Level
±8 kV contact ±8 kV contact
±2 kV, ±4 kV, ±2 kV, ±4 kV,
±8 kV,±15 kV ±8 kV,
air ±15 kV air
±2 kV for ±2 kV for
power supply power supply
lines lines
±1 kV ±1 kV
line(s) to line(s) line(s) to line(s)
0% U ; 0.5 0% U
T
cycle cycle
At 0°, 45°, 90°, At 0°, 45°, 90°,
135°, 180°, 135°, 180°,
225°, 270° and 225°, 270° and
315° 315°
0% U ; 1 cycle 0% U
T
70% U ; 25 / 30 70% U
T
cycle cycle
At 0° At 0°
0% U ; 250 / 0% U
T
300 cycle 300 cycle
30 A/m 30 A/m
43 / 48
Electromagnetic
Environment - Guidance
Floor should be wood,
concrete or ceramic tile.
If floors are covered with
synthetic
relative humidity should
be at least 30%.
Mains
should be that of a typical
commercial or hospital
environment.
Mains
should be that of a typical
commercial or hospital
environment.
; 0.5
T
Mains
should be that of a typical
commercial or hospital
environment. If the user of
the
continued
; 1 cycle
T
during
interruptions,
; 25 / 30
T
recommended that the
device be powered from
an uninterruptible power
supply or a battery.
; 250 /
T
Power
magnetic fields should be
at levels characteristic of
a typical location in a
typical
hospital environment.
MID-97/v1.0
material, the
power quality
power quality
power quality
device requires
operation
power mains
it is
frequency
commercial or