Cleaning; Cleaning The Mask And Headgear; Cleaning The Water Chamber - 3B G3 Series User Manual

Luna G3 BPAP 25A (G3 B25A) User Manual MID-97/v1.0

18. Cleaning

WARNINGS!
• Regular cleaning of the device and its accessories is very important for the
prevention of respiratory infections.
• To avoid electric shock, always unplug the device before cleaning.
• Use mild soap that is nontoxic to humans.
• Follow the manufacturer's instructions on cleaning the mask and tubing and on
determining the frequency of cleaning.
• Before cleaning, check whether the device has been disconnected from the
power supply, whether the power cord has been unplugged, and whether the
water chamber of the device has cooled down. Make sure the plate has cooled
down to room temperature, to avoid the risk of burns.
• Do not open or modify the device. There are no user serviceable parts inside.
Repairs and servicing should only be performed by an authorized service agent.
CAUTIONS!
• Overheating of the materials could lead to early fatigue of these materials.
• Do not use solutions containing chlorinated lime, chlorine, or aromatic to clean
the device and its accessories. Liquid soap containing moisturizing agents or
antimicrobials should not be used either. These solutions may harden cleaned
materials or reduce their lifespan.
• Do not clean or dry the device and its accessories when the temperature is higher
than 80°C (176°F). High temperatures could reduce product life.
• Do not immerse the device in any fluids.

18.1 Cleaning the Mask and Headgear

For details, refer to the cleaning instructions in the user manual for the mask.

18.2 Cleaning the Water Chamber

(1) Opening the Water Chamber: Open the cap of the water chamber, as shown in
Fig. 18-1.
Fig. 18-1
33 / 48