Using The Ramp Feature; Accessing The Icode; Turning The Device Off - 3B G3 Series User Manual

Luna G3 BPAP 25A (G3 B25A) User Manual

13.5 Using the Ramp Feature

Every time the feature is enabled, the pressure will drop to the set initial pressure,
and then gradually rise to the prescribed treatment pressure according to the
preset ramp time, so as to ensure patient comfort. The screen displays a real-time
countdown of the remaining ramp time in minutes.
CAUTIONS!
• You can use the ramp feature as often as you wish during sleep.
• The ramp feature is not prescribed for all users.

13.6 Accessing the iCode

After the device is powered on, move the cursor to the icon
Knob , as shown in the Fig. 13-1. Access the iCode information by pressing the
,
Knob the screen displays the iCode interface, as shown in the Fig. 13-2.

13.7 Turning the Device Off

Take off the mask and headgear, press the Start / Stop Button
device will stop delivering air. Disconnect the power cord from the power outlet to
power off the device.
CAUTION!
• Do not position the device where it is difficult to disconnect the device.
Fig. 13-1
Fig. 13-2
21 / 48
MID-97/v1.0
by turning the
, and the