Preparation; Assembling The Feet Of The Casing And Adjusting The Height Of The Telephone - Auerswald COMfortel 3500 Commissioning Instructions

Voip system telephone and standard voip telephone

Hide thumbs Also See for COMfortel 3500:

Table of Contents

Available languages

Preparation

This section describes the preparations required before commissioning the device. This

includes the setting of the height and the connecting of the key extension modules (not

included in the package) as well as the receiver and/or headset (not included in the package).

Furthermore, this includes installing the telephone in a suitable location.

Assembling the Feet of the Casing and Adjusting the Height of

the Telephone

Requirements

– Telephone and key extension modules separated from each other

– The feet of the casing delivered with the telephone and the key extension

modules

Steps to Take

If required, remove the feet of the casing from the telephone and key exten-

sion modules.

Fig. 6: Removing the feet of the casing

Reassemble the feet of the casing in the required position.

Note: The feet can be assembled in three different positions within the

marked area.

Preparation

COMfortel 3500 - Firmware Version 1.2B - Commissioning Instructions 02 07/12

Table of Contents