Settings - LAUNCH TECH CRT511 User Manual

LAUNCH
Icon descriptions
The memory card is ejected or removed from the memory
card slot.
It appears when the tool is connected to the vehicle's
DLC port via the diagnostic cable.
It appears when the tool is connected to the PC via the
charging cable.
Battery level indicator

4.3 Settings

Select on the main menu screen and press [OK], the system will enter the
following screen:
1) Sensor Pressure units
Set the air pressure units of the sensors (kPa, PSI or Bar).
2) Sensor Temperature units
Set the temperature units of the sensors (C° or F°).
3) Id format
Change the format of the sensor ID display (Auto, Decimal or Hexadecimal).
24
Figure 4-2
www.x431.com +86 755 8455 7891
4) datastream units
Set the measurement units of the datastream items (Metric or Imperial).
5) Auto Power Off
This option enables you to set the time to turn off the tool automatically after
not being operated.
If the "Disable" option is selected, it will disable this auto power-off function.
6) Beeper
Turn the buzzer to On/Off.
7) region
Set the desired vehicle region when accessing the TPMS module.
8) Language
Configure the system language of the tool to your preference language.
www.x431.com +86 755 8455 7891
LAUNCH
25