Change Password; Settings; Units Of Measurement; Print Information - LAUNCH TECH X-431 PRO MINI User Manual

LAUNCH

4.9.7 Change password

This item allows you to modify your login password.

4.10 Settings

It enables you to make some application settings and view software version
information etc.

4.10.1 Units of measurement

It is designed to set the measurement unit. Metric System and English System
are available.

4.10.2 Print information

This option lets you define your print information. It mainly includes Workshop,
Address, Telephone, Fax and License Plate.
After inputting, tap on "Save" to save it.

4.10.3 Launch wireless printer connection

This option is designed to establish a wireless connection between X-431 PRO
MINI and the Wi-Fi printer (sold separately) while performing printing operations.
Follow the steps below to connect the printer.
1. Tap "Launch Wireless Printer Connection";
A. If it is the first time you have operated this printer, please proceed the
following:
2. For initial use, you are suggested to reset the printer: Press and hold [MODE]
& [FEED] for 8 seconds, the following resetting command will be printed out:
at + default = 1
X-431 PRO MINI User Manual
Fig. 4-21
28